Endo Rotary file R-Shaper

R-shaper belongs to NITI rotary files.It is a product developed by our company.By purchasing a set of these files, the doctor can complete the entire process from probing, dredging, enlarging the canal orifice, and finally forming the root canal.

• Made of high quality NiTi alloy with flexible performance after special heat treatment process.
• Improved the fracture resistance.
• Forward cutting angle with excellent cutting efficiency, easy to discharge debris.
• The round tip can prevent steps or piercing through by the side.
• Adaptive thread makes the files efficient ,flexible and high strength.

R, #016: Open & Probe

S1, S2, S3, S4: Shaping & Finishing

R-SHAPER Operation process

Step 1:

First probe the root canal with 10# K file, to make sure exist a glide path, then use 016# PA-FILES to move forward slowly without pressure in pecking motion, exit when feel resistance,and file back with 10#/02 hand use K file to remove debris, then flush and lubricate.

Step 2:

First, Open the upper part of root canal with R# file, move forward slowly without pressure in pecking motion, exit when feel resistance, then use 15#/02 hand use file to check whether the root canal was dredged. Flush and lubricate. After the use of the open file, the root canal orifice is wider.

Step 3:

Insert 20#/04 root canal file and prepare the apical length to the working length, move forward slowly without pressure in pecking motion, exit when feel resistance,then use 15#/02 hand use file to check root canal patency. Flush and lubricate.

Step 4:

Insert 25#/04 root canal file and prepare the apical length to the working length, move forward slowly without pressure in pecking motion, exit when feel resistance,then use 15#/02 hand use file to check root canal patency. Flush and lubricate. Optional step: if the working length is reached in a larger root canal, proceed directly to step 6

Step 5:

Insert 30#/04 root canal file to enlarge the root canal apical part until the preparation reached the working length., move forward slowly without pressure in pecking motion, exit when feel resistance,then use 15#/02 hand use file to check root canal patency. Flush and lubricate.

Step 6:

Insert 25#/04 root canal file to shape the middle part of root canal until the preparation reaches the working length, move forward slowly without pressure in pecking motion, exit when feel resistance,then use 15#/02 hand use file to check root canal patency. Flush and lubricate.

summarize：

• Recommended procedure
• For narrow root canals：Step 1, 2, 3
• For medium sized root canals: Step 1,2,3,4
• For large sized root canals:Step 1,2,3,6,5
• Recommended rotation speed: 300rpm
• Torque: 2.00-2.50N.cm

View some cases